Bell803 phosphorus-free scale inhibitor and dispersant
search
|
Bell803 phosphorus-free scale inhibitor and dispersant
Details Phosphorus-free scale inhibitor and dispersant <= d%> Product features: Suitable for all major reverse osmosis and nanofiltration membranes. .Allows a wide range of water inlet and higher temperatures. Product use: It is a high-efficiency liquid scale inhibitor/dispersant used to control scale deposition in membrane separation systems. Reduce the possibility of particles re-fouling the membrane surface. Problem description: The inorganic precipitation produced by the high salt content and iron compounds in the incoming water is the main cause of scaling pollution in the membrane separation system. This phenomenon must be controlled to prevent the occurrence of deposition on the surface of the reverse osmosis membrane. And avoid the increased pressure difference causing surface damage to the reverse osmosis membrane. Processing and addition requirements: Dosing point: The required amount of dosing needs to be determined according to the operating conditions of the individual device and is based on the incoming water salinity, temperature, recovery rate, type of reverse osmosis membrane, etc. Calculate an appropriate dosing amount. The conventional dosing amount is.-.The maximum dosing amount is. Note: Too much or too little dosing will cause membrane fouling. Please contact your Chinese representative to determine the best dosing amount and dosing point. Dilution: Can be added directly or diluted for use. For dilution, use r product water or desalted water. The dilution factor should not exceed the normal temperature. Product characteristics: , Appearance: yellow to amber liquid , Density: . , (%): , Freezing point: -℃ , Minimum storage temperature: -℃ , Viscosity: .(℃) Packaging specifications : Product packaging formats are kg/barrel and kg/barrel A total of0articles Related Comments: |